Our crack sealer is a single component joint and crack sealant specifically designed for asphalt cracks. It is manufactured using select engineered asphalt cements, polymers, select oil resins and UV inhibitors. Our crack sealer will not flow from the joint or be picked up by vehicle tires, foot traffic, skateboards or roller blade wheels in high surface temperatures.

 

Crack sealing begins with surveying the areas to be crack sealed.  Once an area is deemed to be a good candidate for crack sealing, the cracks are then cleaned out and filled with a hot rubberized crack sealer.

For application, the sealer is heated in a kettle to a temperature of 185°C (365°F).  Once the sealer is melted, it is then injected into the crack and a sealer shoe will squeegee any residual sealer with a neat two inch over-band.

 

The crack sealer then hardens almost instantly back into its rubber form.  It is ready to drive on in 60 seconds